Rice Lake MSI-8000HD Operator's Manual
  1. Manuals
  2. Brands
  3. Rice Lake Manuals
  4. Accessories
  5. MSI-8000HD
  6. Operator's manual

Rice Lake MSI-8000HD Operator's Manual

Weight indicator/rf remote display
Hide thumbs Also See for MSI-8000HD:
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
MSI-8000HD
RF Remote Display
Operator's Manual
159007

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MSI-8000HD and is the answer not in the manual?

Questions and answers

Related Manuals for Rice Lake MSI-8000HD

Summary of Contents for Rice Lake MSI-8000HD

  • Page 1 All manuals and user guides at all-guides.com MSI-8000HD RF Remote Display Operator’s Manual 159007...
  • Page 2 All manuals and user guides at all-guides.com...

  • Page 3: Table Of Contents

    Course descriptions and dates can be viewed at www.ricelake.com/training or obtained by calling 715-234-9171 and asking for the training department. © Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America. Specifications subject to change without notice.
  • Page 4 6.2 Error Codes ................. 39 6.3 Mechanical Dimensions ............. 40 6.4 Firmware Update Procedure ..........40 The MSI Limited Warranty ............43 Rice Lake continually offers web-based video training on a growing selection of product-related topics at no cost. Visit www.ricelake.com/webinars. ii MSI-8000HD Operator’s Manual...

  • Page 5: Introduction

    All manuals and user guides at all-guides.com Introduction The MSI-8000HD RF Remote Display is a wireless remote display for viewing weight from several compatible MSI Crane Scales and Dyna-Links. It is fully sealed for outdoor use in most ambient conditions. Using a Remote Display enhances the safety and usability of the MSI’s Dyna-Link and Crane Scale systems.

  • Page 6: Safety Section

    "MSI Crane Scale Safety and Periodic Maintenance Manual" (available at www.msiscales.com). Keep hands, feet and loose clothing away from moving parts. There are no user serviceable parts within the MSI-8000. Any repairs are to be performed by qualified service personnel only. MSI-8000HD Operator’s Manual...

  • Page 7: Front Panel Descriptions

    PRINT ZERO MSI-8000 Measurement Systems TARE International Figure 1-1. MSI-8000HD Front Panel 1.2 Front Panel Descriptions Item No Description F1 Key – Programmable to user selectable functions, see Section 3.0. Default – Peak Hold. Functions as the ENTER/SELECT key when in setup menus F2 Key –...
  • Page 8 If a function key does not work, it is probably because the connected Scale/Dyna-Link is not setup to support the key. Example: If the Function key is set for TOTAL, you must also setup the TOTAL mode in the Setup Menu of the target scale. MSI-8000HD Operator’s Manual...

  • Page 9: Specifications

    Programmable multifunction buttons for use as TEST, TOTAL, F1, F2, and F3 Total Remote Devices, PEAK, TARE, NET/GROSS, VIEW TOTAL, PRINT and High Res mode MSI-8000HD No Calibration parameters are stored in the Calibration However, it can be used to calibrate an RF connected scale...

  • Page 10: Features

    • Optional Hard-wired link for applications where RF is not allowed. 1.5 FCC Statement Contains FCC ID: OUR-XBEEPRO The MSI-8000HD complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: i This device may not cause harmful interference.

  • Page 11: Getting Started

    All manuals and user guides at all-guides.com 1.7 Getting Started The MSI-8000HD is usually shipped along with a compatible sensor unit such as an MSI-7300 Dyna-Link 2, or one of MSI’s advanced Crane Scales. MSI ships these systems pre-configured. If the MSI-8000HD is purchased separately, or is to be used with a different system, then the RF Transceivers will have to be mated.

  • Page 12: Unpacking

    - WiFi Ethernet 1.9 Unpacking When unpacking the MSI-8000HD, ensure that all parts are accounted for. Check the MSI-8000HD for any visible damage and immediately report any damage to your shipper. It is advisable to use the original shipping container when shipping or transporting the MSI-8000HD.

  • Page 13: Operation

    , the LCD will show all segments for a display text and the software POWER version number will display. The MSI-8000HD is ready for use. 2.2 Zero Sets the zero reading of the Scale/Dyna-Link. Takes out small deviations in zero when the Scale/Dyna-Link is unloaded.

  • Page 14: Tare

    In scale applications, tare is typically used to zero out a known weight such as rigging, a container, or pallet and display the load in NET load/weight. The MSI-8000HD tare function is defined as a Tare-In/Tare-Out operation. The first press of the...

  • Page 15: User Defined Function Keys

    Section 4.0. In software release 1-XX, F3 is dedicated to the print function and cannot be changed. The functions PRINT (F3) and TARE are available full-time on the MSI-8000HD, they do not need to be programmed. 3.1 Off No USER Key Function assigned.

  • Page 16: Manual Total

    Switching back to Gross mode from Net mode will not clear the Tare value. This allows the operator to use the Gross Mode temporarily without having to reestablish the tare value. Only clearing or setting a new tare will change the tare value held before switching into Gross Mode. MSI-8000HD Operator’s Manual...

  • Page 17: Peak Hold

    All manuals and user guides at all-guides.com 3.5 Peak Hold Peak Hold automatically updates the display when a higher peak weight reading is established. The Peak Hold function uses a high speed mode of the A/D converter (220 samples) allowing it to capture transient loads at a far higher rate than typical Dynamometers. Peak hold is cleared and re-enabled with the Key.

  • Page 18: 2-Units/ 5-Units

    Note PN 152160) Hi-Res Mode will make the MSI-8000HD more sensitive to motion and movement resulting in a less stable display. When Hi-Res is on, the filter is automatically set to the Hi-1 setting (if Hi-2 is already set, then the filter is not changed). This will have a small effect on settling time.

  • Page 19: Total Remote Devices

     displays (with ) or the summed weight (with “ttL.rd”). 3.11 Tare key is redundant in the MSI-8000HD since it has a permanent key. Fx-Tare TARE This was done for consistency across the ScaleCore based product line. There is no need to program a function key to “TARE.”...

  • Page 20: Set Up

    Peak Hold 2 Units F2 Key F2 5 Units Auto Off Time Hi Res Print Disabled (default) Tare 15 minutes Scan 30 minutes Total Remote 45 minutes Devices 1 hour AUTO OFF TIME Figure 4-1. Menu Map MSI-8000HD Operator’s Manual...

  • Page 21: Function Keys

    All manuals and user guides at all-guides.com 4.2 Function Keys The MSI-8000HD has 2 user definable function keys (F1 and F2) on the Front Panel that can be programmed. F1 is defaulted to Peak Hold and F2 is defaulted to Test.

  • Page 22: Auto-Off

    Any time any button is pressed, or the detected load is in motion exceeding 10d, the time limit is reset. Therefore, the MSI-8000HD will stay on indefinitely if the load is changing or any button is pressed at least once. With A- OFF disabled, it will remain on;...

  • Page 23: Comm Set Up

    • Network ID - This is a 64 bit number that all interconnected devices must match. The MSI-8000HD limits this number to a max of 6 digits for a range of 0-99999. Do not use a small number here to help avoid other 802.15.4 networks that default to a Network ID of 0.
  • Page 24 RF Power Transmit Setting Level Current Note 10dBm 137mA Lowest Transmission Power 12dBm 155mA (default on 7300s and 8000s) 14dBm 170mA 16dBm 188mA 18dBm 215mA Table 5-1. Transmission Strength Settings MSI-8000HD Operator’s Manual...

  • Page 25: Rf Setup

    All manuals and user guides at all-guides.com 5.1 RF Setup RF Setup Procedure Press Simultaneously 1) With the power on, open the Comm Setup Menu by pressing the keys simultaneously. The COMM Setup Menu appears. The first menu choice is “Print”. SCROLL 2) Press to scroll to the RF...
  • Page 26 Press the ZERO key to exit out of the RF setup ZERO menus. 21) Press ZERO again to exit EXIT/SAVE the COMM setup menu and store the new RF network numbers. ZERO Figure 5-3. RF Set Up (Continued) MSI-8000HD Operator’s Manual...

  • Page 27: Rf Set Up, Dyna-Link And Msi Crane Scales

    MSI-8000HD Printing is only available on the linked The Net ID and RF Channel must exactly match the MSI-8000HD. The ScaleCoreID (SCID) must be unique. The first Scale/Dyna-Link must have a SCID of 0. In multiple link systems, setup sequential SCIDS starting at 0.

  • Page 28: Summing Modes

    Fx ttl.rd key will scroll through the summed combinations. First “Pair1,” next “Pair2,” then the sum of all connected sensors is displayed. Sensor summing disabled. Even if a function key is set to “ttl.rd” nothing will happen. MSI-8000HD Operator’s Manual...

  • Page 29: Behavior Of Zero And Tare In Multiple Channel Systems

    The RS-232 Comm Port is capable of outputting load data. All the weight modes the RF linked weight device can measure are available in user formatted form. The control Mode programs are what cause the MSI-8000HD to print. The modes are: 1.

  • Page 30: Control Modes

    ScCMP application (ScaleCore Configuration Management Program). • Continuous - The MSI-8000HD will continuously output the data at a rate controlled by the “rAtE” (RATE) menu. • Off - Printing is disabled. Power consumption is lower with print off.
  • Page 31 All manuals and user guides at all-guides.com Using ScCMP application, custom output strings are possible. See the ScCMP programming guide for details. The serial output is configured as 9600 baud, Xon/Xoff handshaking, no hardware handshaking, 1 stop bit, no parity. Other baud rates are possible by special order only. Printer / Output Setup Press Simultaneously 1) With the MSI-8000 on, press the...

  • Page 32: Comm Port Hardware

    Figure 5.6 Printer/Output Set Up (continued) 5.9 COMM Port Hardware The MSI-8000HD RS-232 Comm Port is used for software updates, connecting to a remote display and for connecting to any RS-232 device. Connector: M12 industrial IP67 rated. An adapter cable (PN 150964) is required to connect the MSI-8000HD to a computer.

  • Page 33: Service Counters

    The power up routine will be interrupted when the lift counter exceeds 16383 lifts or the overload counter exceeds 1023 overloads. Push any key to continue operation. Feature only available on MSI-8000HD Software release 2.00 and above. Service counters are available on the Scale/Dyna-Link front panel Test function. COMM Set Up...
  • Page 34 Reference MSI’s “Crane Scale Safety and Periodic Maintenance Manual” for proper loading techniques to improve the safety and longevity of your Crane Scale or Dyna- Link. This publication is available at www.msiscales.com and is included in the CD shipped with your MSI-8000HD. MSI-8000HD Operator’s Manual...

  • Page 35: Relays

    MSI-8000HD can be equipped with up to three relays for process control or safety systems. In the non meter MSI-8000HD, relays are programmed on the unit that the Note 8000HD is "talking" to. Two independant relays are installed and are wired out to 4 pins on a M12 connector.
  • Page 36 - AC/DC SSR 400Vpk, 0.5A: 14628 AQZ404. 0.5A Fuse 13539 (Use limited to 250VRMS due to connector and Cordset limitations). Requires a minor modification on the Relay board and can only be ordered Note by contacting MSI. Figure 5-9. Internal Relay Wiring Diagram MSI-8000HD Operator’s Manual...

  • Page 37: Antenna Options

    All manuals and user guides at all-guides.com 5.12 Antenna Options To meet FCC licensing rules, you must use only antennas supplied or Note recommended by MSI. Antenna placement is critical to problem free use of your system. • Be sure a relatively clear transmission path exists between the devices to be connected.

  • Page 38: 1Antennas Available For A Msi-8000Hd

    All manuals and user guides at all-guides.com 5.12.1 Antennas Available for a MSI-8000HD STANDARD ANTENNA The Standard Antenna is an articulated 1/2 wave 2dBi gain design with a standard TNC connector that mounts directly on the 8000HD enclosure. This antenna and coax connector, though resistant to water, is not water- proof.
  • Page 39 All manuals and user guides at all-guides.com YAGI Antenna For maximum range, a 14dBi Gain Yagi Antenna is available by special order. Please contact MSI for details. Corner Reflector Antenna Corner Reflector antennas are often the best choice for a wall mounted antenna. MSI offers a 14dBi and a 9dBi Corner Reflector.

  • Page 40: Appendix

    Displayed tension Scale not zeroed Zero the scale with no load attached shows large error before load is lifted lb/kg units causing Select proper units confusion Requires recalibration Recalibrate Table 6-1. Troubleshooting MSI-8000HD Operator’s Manual...
  • Page 41 All manuals and user guides at all-guides.com Problem Possible Cause Solution Display reading Excessive vibration Increase filtering or increase ‘d’ in Cal not stable Excessive side Improve load train symmetry loading Load cell faulty Check LC connections Display toggles Load exceeds Reduce tension immediately between “Error”...
  • Page 42 MSI-8000HD Turn off the MSI-8000HD . While power is remains blue and being drawn fromt the battery, it won’t top never turns green off the battery. The battery condition Replace the Battery. is poor. Table 6-1. Troubleshooting MSI-8000HD Operator’s Manual...

  • Page 43: Error Codes

    All manuals and user guides at all-guides.com 6.2 Error Codes The ScaleCore Processor that is the heart of the MSI-8000HD detects errors and generates error codes to aid in troubleshooting. Error Code Definition Comment LC Disabled A Load cell was not enabled...

  • Page 44: Mechanical Dimensions

    Figure 6-1. Mechanical Dimensions 6.4 Firmware Update Procedure Updating firmware in the MSI-8000HD requires the following: a DCE serial cable (PN 150964, or build per DCE cable schematic on page 28), a PC with a terminal program (“Teraterm Pro” recommended), and if the PC does not have standard RS- 232 serial ports, then a USB to serial converter.
  • Page 45 4. On the terminal keyboard, type {ffff09=0199} 5. Change the terminal serial port to 38400 BAUD. Hit the ‘r’ key to refresh the display. The following menu should appear MSI-8000HD SCALECORE2 BOOT LOADER Ver. 00-05 (c) 2012-05-02 10:55 (u) Download and program application code...
  • Page 46 MSI-8000 SCALECORE2 BOOT LOADER Ver. 00-05 (c) 2012-05-02 10:55 (u) Download and program application code (your bootloader version may vary) (q) query app code info (g) execute app code refresh 11.Send a “ .” The MSI-8000HD should start. MSI-8000HD Operator’s Manual...

  • Page 47: The Msi Limited Warranty

    All manuals and user guides at all-guides.com The MSI Limited Warranty MEASUREMENT SYSTEMS INTERNATIONAL, INC., WARRANTS load sensing elements and meters against defects in workmanship and materials for a period of one year from date of purchase and warrants electrical cables and batteries against the same defects for a period of ninety (90) days from date of purchase.
  • Page 48 All manuals and user guides at all-guides.com Measurement Systems International A RICE LAKE WEIGHING SYSTEMS COMPANY 14240 Interurban Avenue South Suite 200 Seattle, WA 98168-4661 USA Phone: 206-433-0199 Fax: 206-244-8470 © Rice Lake Weighing Systems www.ricelake.com www.ricelake.mx www.ricelake.eu www.ricelake.co.in m.ricelake.com...

Table of Contents