Table of Contents
Advertisement
4.6
Output
Relay output allows the selection of Latch or Coil relays.
• Latch relays retain position even if the power fails
• Coil relays reset when power fails
IMPORTANT: In the event of a power failure, the Latch relay uses continuous battery power and will deplete the battery
more quickly than the coil relay.
1. Press and hold
2. Press
to scroll to the .
F2
3. Press
. The current setting is displayed.
F1
4. Press
to toggle between and .
F2
NOTE: The display brightness changes when each setting is displayed.
5. Press
when the desired setting is displayed. displays.
F1
6. Press
to exit setup and store the settings.
ZERO
4.7
Battery Life – Optional
Select either Standard () or Long ().
In Long battery life mode, the system is placed into a sleep state for several seconds at a time if there is no change in tension.
This disables the display in order to reduce power consumption and increase battery life. After several seconds, the
MSI-8000HD will wake up to check for any changes in tension. If there is a change in tension, the unit will stay awake. The unit
will also stay awake if it is in configuration mode.
Although long battery life mode can significantly increase battery life, performance is better in Standard battery life mode.
1. Press
and
F2
2. Press
to scroll to .
F2
3. Press
. The currently saved battery life displays.
F1
4. Press
to toggle between the choices.
F2
5. With choice displayed, press
6. Press
to save and exit to weighing mode.
ZERO
and
. displays.
F1
POWER
simultaneously. displays.
POWER
to select. displays.
F1
© Rice Lake Weighing Systems ● All Rights Reserved
Setup
13
Advertisement
Table of Contents
