Modulex EXT Commercial Series
CHAPTER 5: UFLY CONTROLLER & BCM MODULES
5.1.2 Reading the Icons on Home Page
Heating: Access space heating parameters including setpoint, outdoor reset and
building reference temperature.
Domestic Hot Water: Access domestic hot water parameters including setpoint,
timed programming, and legionella protection function
Solar: This menu is currently not available.
Burner: Access calibration, manual operation, and troubleshooting settings. This
menu is password protected and is only for authorized AERCO technicians.
Setup: Access general setup parameters including time and date, display settings,
language, and units of measure.
Devices: Access BCM parameters for functions including 0-10V operation and
domestic hot water operation.
OMM-0160_A • DRAFT
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Page 68 of 117