Modulex EXT Commercial Series
CHAPTER 4: Installation Instructions
4.34 Sweeper Mode (Manual Control)
1. Insert psw and select sweeper again. Vary % mod. request from 10% to 100%.
2. Activate Sweeper Mode.
3. Chose burner among those available, e.g.: usually 1 / Modulex (from 1 to 8).
NOTE: Note: once selected the burner, (3) the display page changes: Burner # 1 ...... # 8
4. Activate manual control of selected burner.
OMM-0160_A • DRAFT
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Page 61 of 117