Deco
- tape saturation & doubletracker
Factory Reset
Performing a Factory Reset restores the pedal to its factory default
Power-up modes and secondary functions, and replaces all stored pre-
sets with their factory default settings�
1
Press and hold the DOUBLETRACKER ON footswitch while connect-
ing power to the pedal� Once both LEDs flash, release the footswitch�
2
Sweep the VOLUME knob from 0-100% and back two times� Both
LEDs will change colors at the extremes of the knob range and blink
RED
to indicate when the reset is taking place�
• TURN 1:
AMBER
• TURN 2:
RED
• TURN 3:
AMBER
• TURN 4: Both LEDs flash RED, Deco resets and restarts
pg 35