Factory Reset - Strymon ULTRAVIOLET vintage vibe User Manual

Factory Reset

Performing a Factory Reset restores the pedal to its factory default
Power Up functions and replaces all stored presets with their factory
default settings�
1
Press and hold the footswitch for at least 2 seconds while powering
up UltraViolet� Once the LED flashes RED, release the footswitch�
2 Press and hold the footswitch again, and while still holding it down,
sweep the INTENSITY
maximum and back two times� The LED will change colors at the
extremes of the knob range and flash
reset is taking place�
• TURN 1, from minimum to maximum:
• TURN 2, from maximum to minimum:
• TURN 3, from minimum to maximum:
• TURN 4, from maximum to minimum and release the footswitch
immediately: The LED flashes RED, UltraViolet resets and
restarts
blend
chorus vibrato low
MODE
INTENSITY
FACTORY
RESET
SPEED
vintage vibe
(FACTORY
mid
high
BIAS
VOLUME
RESET) knob from minimum to
RED to indicate when the
AMBER
RED
AMBER
pg 26