Riverside
- Multistage Drive
Factory Reset
Press and hold the ON footswitch during
1
power up.
Turn the DRIVE knob from 0-100% and back two (2) times (back and forth) to reset
2
the pedal to factory power up modes and secondary functions.
FACTORY SETTINGS
• EXP Input Jack: Assigned to work in VOLUME PEDAL mode.
• Expression Pedal Mode Assignment: Assigned to control DRIVE.
• BOOST Input Jack: Assigned to work in BOOST SWITCH mode.
• BOOST Amount: Set to 50%.
• Noise Reduction: OFF
• Bypass Mode: True Bypass
®
pg 15