Factory Reset - Strymon Zelzah User Manual

Zelzah
- Multidimentional Phaser

Factory Reset

Restores the pedal to factory power up modes and secondary functions
and replaces all stored presets with the factory defaults.
classic
barber
env
SPEED
DEPTH
Sweep the DEPTH (4-STAGE) knob from 0-100% and back two
2
(2) times. The ON (4-STAGE) LED will change colors at the
extremes of the knob range and blink
reset is taking place.
Turn 1: AMBER
Turn 2: RED
Turn 3: AMBER
Turn 4: Both LEDs flash RED, Zelzah resets and restarts
FACTORY SETTINGS
EXP/MIDI Jack: Assigned to
EXPRESSION mode
Input Level: Instrument
Bypass Mode: True Bypass
MIDI channel: 1
MIDI Output Mode: Off
SWEEP RESONANCE
o
mild
strong
phase time
MIX VOICE
multidimensional phaser
Press and hold
1
the ON (6-STAGE)
footswitch while
connecting power to
SPEED
the pedal. Once both
LEDs flash, release
the footswitch.
DEPTH
RED
to indicate when the
4-Stage Stereo Spread: Off
6-Stage Stereo Spread: Off
Barber Polarity: Positive
Signal Routing: Series
MIDI Clock Sync: Off
MIDI Expression: On
pg 31