Saving Presets; Restoring Factory Presets; Editing Parameters - Strymon TIMELINE User Manual

TimeLine
- User Manual
Banks and Presets
TimeLine has 100 banks with A & B presets in each bank. Banks are numbered 0 to 99 on the display. The
presets in banks 0-49 are duplicated in banks 50-99 at the factory.

Saving Presets

Save a preset to the current location:
Save a preset to a new location:

Restoring Factory Presets

CAUTION: This procedure will erase any custom presets saved in the TimeLine and restore them to factory
A
POWER UP TimeLine while holding A & TAP. Keep holding for 5 seconds after

Editing Parameters

While displaying
BANK or TIME
TAPE
TYPE
hold the
TYPE encoder
TAPE LO-FI
TYPE
push (bank / time)
hold the
TYPE encoder
Note: To cancel an in-progress save press the TAP footswitch.
B
BANK DOWN
TimeLine has powered up.
VALUE
push the
value encoder
VALUE
push the value
encoder again
LO-FI
VALUE
turn the
VALUE encoder
TAP
BANK UP
to enter PARAMS
VALUE
menu
turn the
value encoder
and turn to edit
the selected
PARAMETER
TAPE LO-FI
TYPE
push the TYPE encoder
to save your settings
TAPE
to select the bank to
save to
REINIT will be displayed
and all factory presets will
automatically be restored
to select the desired
PARAMETER
®
or
LO-FI
TYPE
push the TYPE encoder
or the A or B footswitch
to save your settings
pg 6