Saving Presets In Midi Mode - Strymon DIG User Manual

DIG
- dual digital delay
MIDI Functionality

Saving Presets in MIDI Mode

When in MIDI mode, the currently loaded settings can be saved to any of
DIG's 300 preset locations at any time�
1 To enter Save mode, press and hold BOTH footswitches� Both LEDs
will blink GREEN
Program Change message�
2 To save the current state of the pedal to the currently loaded preset
location, press and hold the TAP footswitch until the LED lights BLUE�
To save the current state of the pedal to any preset location, send
the unit a MIDI Program Change on DIG's currently selected MIDI
channel� For example:
• Send MIDI Program Change #10 to save the preset to the corre-
sponding memory location on the pedal�
• To recall this preset, send MIDI Program Change #10 from your
MIDI controller or sequencer�
NOTE: Press the ON footswitch to cancel the save operation�
(cont.)
to indicate that DIG is waiting to receive a MIDI
OR
pg 33