Editing Parameters; Saving Presets; Using The Looper - Strymon TimeLine Quick Start Manual

PARAMETERS
Each Delay Machine features both UNIQUE and COMMON parameters in the PARAMETER menu to tweak and customize your sound. All can be saved per preset. Several
COMMON parameters are shown below, however the full list of parameters are detailed in the user manual.
NAME — Allows editing the name of current preset. Use TYPE encoder to select a
character. Use VALUE encoder to change the selected character. Exit by pressing
the VALUE encoder. Hold the TYPE encoder to save the name.
TAPDIV — Selects the subdivision to use for delay repeats when tapping in a
tempo. If TAPDIV is set to anything other than quarter notes, the TAP LED will
blink in amber.
BOOST — Set up a +/- 3dB level boost/cut per preset.
LO-FI

EDITING PARAMETERS

While displaying BANK,
NAME, or TIME
VALUE encoder
PLAY

SAVING PRESETS

dTAPE
dTAPE LO-FI
Save a preset to the current location:
dTAPE LO-FI
REC / DUB
hold the
REC / DUB
TYPE encoder
Note: To save to a new location, hold the TYPE encoder, turn the
VALUE knob to the desired bank, tap footswitches A/B to save.
REC / DUB PLAY
TAP
to enter PARAMS
menu
push the
STOP
hold (looper)

USING THE LOOPER

LO-FI
dTAPE
TAP
dTAPE LO-FI
PLAY
push the TYPE encoder
PLAY REC / DUB STOP
to save your settings
hold (looper)
TAP
Download the complete user manual: strymon.net/support/timeline
STOP
REC / DUB
PRSIST —
bypassed. Use this if it is desired for the delay repeats to continue after the effect
has been bypassed. Note: Using trails will put the pedal in buffered bypass mode.
EP — Configure the Expression pedal input to be ON or OFF.
EP SET —
displayed, turn knobs to select minimum settings to be controlled. While TOE is
displayed, turn knobs to select the maximum settings to be controlled.
to select the desired
turn the
VALUE encoder
dTAPE dTAPE LO-FI
LO-FI
To use the Timeline in LOOPER mode:
TAP
REC / DUB REC / DUB
STOP
press and hold the to start a loop tap the
hold (looper)
PLAY
TAP footswitch to get REC/DUB footswitch
in/out of looper mode
TAP
Note: Looper controls such as loop level, location, and exit behavior can be changed in GLOBAL settings.
PLAY STOP
Turns on delay persist "trails" which will spill over when the effect is
Set up knobs to be controlled by an expression pedal. While HEEL is
PARAMETER
push the
VALUE encoder
dTAPE LO-FI
LO-FI
dTAPE LO-FI
TAP
REC / DUB PLAY
PLAY PLAY REC / DUB
to play a recorded loop to add to a current
REC / DUB STOP PLAY
tap the PLAY footswitch loop tap the REC/DUB
hold (looper)
footswitch again
and turn to edit the
selected PARAMETER
dTAPE LO-FI
TAP
TAP TAP
TAP
STOP
STOP STOP PLAY
hold (looper)
hold (looper) hold (looper)
to stop the current
STOP
loop tap the STOP
hold (looper)
(TAP) footswitch