Saving Presets In Midi Mode - Strymon Zelzah User Manual

Zelzah
- Multidimentional Phaser
MIDI Functionality - Saving Presets in MIDI Mode
When in MIDI mode, the currently loaded settings can be saved to
any of Zelzah's 300 preset locations at any time.
To enter SAVE mode,
1
press and hold the ON
(4-STAGE) footswitch.
The ON (4-STAGE)
LED will blink
to indicate that Zelzah
is waiting to receive a
MIDI Program Change
message.
To save the current state of the pedal to the currently loaded preset
2
location, press the ON (4-STAGE) footswitch.
OR
To save the current state of the pedal to any preset location,
send the unit a MIDI Program Change on Zelzah's selected MIDI
channel. The ON (4-STAGE) LED will flash and Zelzah will save the
current state of the pedal to the preset location that corresponds
with the MIDI Program Change message that was received.
NOTE: Press the ON (6-STAGE) footswitch to cancel
the save operation.
BLUE
SWEEP RESONANCE
classic
barber
env
SPEED
phase
MIX
DEPTH
multidimensional phaser
o
mild
strong
SPEED
time
VOICE
DEPTH
pg 28