Table of Contents
Advertisement
WARNING:
Any other use is forbidden.
The GB752SVSRVT-5 is a pneumatic-hydraulic split handle installation tool designed specifically for the efficient installation of blind
rivets. This tool's unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in
hand weighs 2.00 lbs. (.91kg). The entire split handle installation tool weighs 7.00 lbs. (3.18 kg). It has a .500" (12.7 mm) fastener setting
stroke.
The GB752SVSRVT-5 split handle installation tool operates on 90 to 100 psi. (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) of air
pressure providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB752SVSRVT-5 does not exceed 81.5 dB(A) and
consumes .16 SCF/cycle (4.53 L/cycle).
The GB752SVSRVT-5 comes with 5 feet (1.5 m) of hose. The air inlet has a 1/4-18 female pipe thread for accepting the user's air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on pg. 20 for nose assembly recommendations).
WARNING:
Do not operate in an explosive atmosphere.
The GB752SVSRVT-5 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB752SVSRVT-5 INSTALLATION TOOL
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
Air pressure req'd
Air consumption
Hydraulic Oil
Setting stroke
Noise level
Rated pull load
Vibration
S/N: 1001 AND ABOVE
DESCRIPTION
- 2.00 lbs. (.91 kg)
- 90-100 p.s.i. (6.2-6.9 bar)
- .16 SCF/cycle (4.53 L/cycle)
- Automatic Transmission Oil,
Dexron® III, or equivalent.
- .500" (12.7 mm)
- 81.5 dB(A)
- 3,500 lbs. (15.6 kN)
- Tested– No Hazards Found.
4
REV 5/22
Advertisement
Table of Contents
