Table of Contents
Advertisement
WARNING:
Any other use is forbidden.
The GB208-625 and GB208-625A are hydraulic installation tools designed specifically for the efficient installation of blind rivets, lock-
bolt fasteners thru 3/8" diameter, and installation of interference for Hi-Lite® pins. They provide a high power to weight ratio enabling
one hand installation at production speed. They weigh just under 4 lbs. (1.81 kg) and can be operated in any position. They have a .625
(15.9 mm) fastener setting stroke and a rated pull load of 10,000 lbs. (44.5 kN).
The GB208-625 installation tool operates on hydraulic pressure developed by the GB940 Powerunit set at 5,600 psi. (386.1 bar) maximum
PULL pressure and 2,400 psi (165.5 bar) maximum RETURN pressure. The tool comes equipped with a 12' (3.7 m) hydraulic hose with
quick disconnects and a electric control cord assembly .
The GB208-625A installation tool operates on hydraulic pressure developed by the GB910 & GB912 Powerunits set at 5,600 (386.1 bar) psi
maximum PULL pressure and 2,400 psi (165.5 bar) maximum RETURN pressure. The tool comes equipped with a 12' (3.7 m) hydraulic
hose with quick disconnects and a air line assembly.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE INSTALLATION TOOL AND MUST BE ORDERED SEPARATELY.
(See nose assembly selection chart on pg. 15).
WARNING:
Do not operate in an explosive atmosphere.
The GB208-625 & GB208-625A can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB208-625 / GB208-625A
ENVIRONMENTAL USE
Weight
Hyd. Pressure Req'd.
Hyd. Power Source
Hydraulic Oil
Setting Stroke
Rated Pull Load
DESCRIPTION
SPECIFICATIONS
- 4 lbs. (1.81kg)
- 5,400 –5,600 psi (372-3 - 386.1 bar) PULL MAX
2,200 –2,400 psi (151.7 - 165.5 bar) RETURN MAX
- GB910, GB912 or GB940
Powerunit or equivalent.
- Automatic Transmission Oil,
Dexron® III, or equivalent.
- .625" (15.9 mm)
- 10,000 lbs. (44.5 kN)
4
9/16 REV 6/22
Advertisement
Table of Contents
