Page 1
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS. GB752SVSRVT-5 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT 44766 Centre Court, Clinton Twp., MI. 48038 USA Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505 solutions@gagebilt.com / www.gagebilt.com...
Overhaul ....................................14-16 Parts Lists .................................... 17-18 DEXRON® III Oil Safety Data (SDS) ............................19 Nose Assembly Selection Chart and Accessories ......................20-24 GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
GAGE BILT DECLARATION OF CONFORMITY MANUFACTURER: Gage Bilt Inc. 44766 Centre Ct., Clinton Twp., Michigan U.S.A. +1 (586-226-1500) WE DECLARE THAT THE EQUIPMENT SPECIFIED HEREIN CONFORMS TO THE FOLLOWING DIRECTIVES AND STANDARDS Machinery Directive 2006/42/EC EN12100-1 & EN12100-2:2010 EN ISO 11148-1:2011 EU REPRESENTATIVE Edgar Hausmann GmbH Förster-Busch-Str.
.16 SCF/cycle (4.53 L/cycle). The GB752SVSRVT-5 comes with 5 feet (1.5 m) of hose. The air inlet has a 1/4-18 female pipe thread for accepting the user's air hose fitting. NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg.
Actuator Air Line Bleed Screw Handle Assembly Flow_Speed control valve Air Inlet Pintail Evacuation Vacuum Assembly Image may not reflect actual tool GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip can then be used to support the tool. GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Air Piston moves down Air exhaust Air exhaust Pressurized Oil Unpressurized Oil Pressurized Air Unpressurized Air Images may not reflect actual tool GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD CYLINDER WORK FASTENER ACTUATOR RED SHIPPING PLUG USER QUICK AIR INLET DISCONNECT FITTING AIR HOSE Image may not reflect actual tool GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Press actuator to start cycle. Release actuator as soon as fastener breaks. Repeat steps 1-4. Images may not reflect actual tool or fastener GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
WARNING: Tool must be maintained in a safe working condition at all times and examined on a daily basis for damage or wear. Any repair must be done by qualified personnel trained on Gage Bilt procedures. WARNING: Excessive contact with hydraulic oil and lubricants must be avoided.
Hole marked #4 on Manifold Head Oil passage with Assembly (744306) facing upward. o’ring (S832) ***Keep air hole free from oil*** Images may not reflect actual tool. GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Subtract dimension (A) from dimension (B). If stroke is not consistent within 1/64" (.396 mm) repeat bleeding steps 1-8. For your consideration, Gage Bilt offers a depth gage (Pt.# A-1935) to help simplify and more accurately check your tool stroke.
4) S.H.C.S. Fitting Image may not reflect actual tool GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of Lubriplate® (Gage Bilt part no. 402723) or other lubricant is recommended during reassembly to prevent tearing or distorting of o'rings.
Page 15
Insert and turn 5/8” open end box wrench and snug tight approximately 1/4-1/2 turn. Re-attach the lever assembly (724017) including spring pin (A-1174). GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Page 16
Valve spring installation tool assembly (704262) will facilitate the proper installation of the spring (704141). Valve sleeve (704140) can be pulled out using valve sleeve removal tool assembly (704163). GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
GB752SVSRVT-5 ACCESSORIES Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) NOSE ASSEMBLY SELECTION CHART STRAIGHT RIGHT ANGLE OFFSET (Sold Separately) (Sold Separately) (Sold Separately) FASTENER DIA. STRAIGHT *RIGHT ANGLE...
Page 21
Accessories Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Adapter Assembly Adapter Assembly #751204 #730715 Adapts 204 offset series nose Adapts XX-715 & XX-51 series nose assemblies to GB752 installation tool.
Page 22
Accessories Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Air Bleeder Assembly Fill Bottle Tool Stroke Depth Gage #704153 #745263 #A-1935 (Sold Separately) (Sold Separately) (Sold Separately) Image may not reflect actual gage.
Page 23
This page intentionally left blank GB752SVSRVT-5 INSTALLATION TOOL S/N: 1001 AND ABOVE REV 5/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
Page 24
Riveter Kits Available (Sold Separately) Gage Bilt offers a wide selection of standard and custom kits tailored to your needs. Approved Split Riveter Tool Backpacks For 5ft hose Split System Tools. (Sold Separately) DEXRON® IS A REGISTERED TRADEMARK OF GENERAL MOTORS CORPORATION. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION. TEFLON® IS A REGISTERED TRADEMARK OF E.I.