Table of Contents
Advertisement
WARNING:
Any other use is forbidden.
The GB752SH is a pneumatic-hydraulic installation tool designed specifically for the efficient installation of blind rivets and lockbolts.
This tool's unique "split" system provides the operator with a lightweight ergonomic tool. The handle assembly and head cylinder
assembly when held in hand weighs 2.50 lbs. (1.13 kg). The entire split handle installation tool weighs 7.50 lbs. (3.40 kg). It has
a .500" (12.7 mm) fastener setting stroke.
The GB752SH split handle installation tool operates on 90 to 100 psi. (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB752SH does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The GB752SH comes with 8 feet (2.4 m) of hose. Vacuum systems are available for this tool, please consult our engineering department
for specific applications.
The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection
chart on pg. 20).
WARNING:
Do not operate in an explosive atmosphere.
The GB752SH can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB752SH INSTALLATION TOOL: S/N# 1144 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 2.50 lbs. (1.13 kg)
Air pressure req'd
- 90-100 psi. (6.2-6.9 bar)
Air consumption
- .30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
- Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
- .500" (12.7 mm)
Noise level
- Less than 81.5 dB(A)
Rated pull load
- 3,800 lbs. (16.9 kN)
Vibration
- Tested– No Hazards Found.
4
REV. 5/22
Advertisement
Table of Contents
