Table of Contents
Advertisement
WARNING:
Any other use is forbidden.
The GB510NAS and the GB510ANAS are hydraulic installation tools designed specifically for the efficient installation of 5/16" (7.94 mm)
NAS Shear, NAS Tension Pull Type lockbolts, C6L® & GP® fasteners. They weigh just over 4 lbs. (1.81 kg) and can be operated in any
position. They have a .750" (19.1 mm) fastener setting stroke and a rated pull load of 7,800 lbs. (34.7 kN).
The GB510NAS (electric actuated) installation tool operates on hydraulic pressure developed by the GB947 Powerunit set at 5,400 psi.
(372.3 bar) - 5,600 psi. (386.1 bar) maximum PULL pressure and 2,200 (151.7 bar) - 2,400 psi (165.5 bar) maximum RETURN pressure.
The tool comes equipped with a 12' (3.7 m) of hydraulic hoses with quick disconnects and a electric control cord assembly.
The GB510ANAS (air actuated) installation tool operates on hydraulic pressure developed by the GB910 & GB912 Powerunits set at
5,400 psi. (372.3 bar) - 5,600 psi (386.1 bar) maximum PULL pressure and 2,200 (151.7 bar) - 2,400 psi (165.5 bar) maximum RETURN
pressure. The tool comes equipped with a 12' (3.7 m) of hydraulic hoses with quick disconnects and an air line assembly.
WARNING:
Do not operate in an explosive atmosphere.
The GB510NAS & GB510ANAS can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB510NAS/GB510ANAS INSTALLATION TOOL: S/N 1045 AND ABOVE
CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Weight
Hyd. Pressure Req'd.
Hyd. Power Source
Hydraulic Oil
Setting Stroke
Rated Pull Load
- 4 lbs. (1.81kg)
- 5,400 - 5,600 psi (372.3 bar - 386.1 bar) MAX. PULL
2,200 - 2,400 psi (151.7 bar - 165.5 bar) MAX. RETURN
- GB947, GB910 or GB912
Powerunit or equivalent.
- Fire resistant hydraulic oil conforming
with OSHA regulation 1926.302.
- .750" (19.1 mm)
- 7,800 lbs. (34.7 kN)
4
Rev 9/23
Advertisement
Table of Contents
