Setting Dpof (Digital Print Order Format) - Ricoh Camera RDC-i700 Operation Manual

Setting DPOF (Digital Print Order Format)

This function enables you to set the number of prints and number of indexes
when having prints made of files on the CF card or PC card by a digital printing
service. After making the settings, the prints can be made according to the
preset information at the digital camera printing service.
• Leave enough space for one or two prints on the storage memory to
Note
allow the print service settings to be made.
• After making the print service settings, do not make any recording,
erasing or other settings. If any such action is made, reset the print
service settings.
A Switch to Edit mode and select
• P.89 "Switching to Edit Mode"
See
The DPOF setting menu will be displayed.
• Specifying the Number of Prints
• Specifying the Number of Indexes
• Canceling the DPOF Settings
Specifying the Number of Prints
A Display the image which you want to
have printed and specify the number
of prints.
To continue setting the number of prints,
repeat the procedure.
Thumbnail Display
Select the image which you want to have
printed using the stylus pen or
and specify the number of prints.
• P.34 "How to Use the Spin Box ( )"
See
• To cancel the setting, set the
Note
number of prints to zero (0).
.
See below
P.104
P.105
· buttons
4
103