Table of Contents
Advertisement
Still Picture Mode
Use the still picture mode for normal shooting.
I Operation Map
1
Set the mode dial to [
m m m m See "Changing the Size of the Subject (Zoom)" (p.38)
See "Adjusting the Focus" (p.36)
2
Press the shutter release button.
The image will be displayed and recorded.
Important
• Do not slide the card cover switch to remove the SD memory card,
or disconnect the AC adapter during recording.
• The autofocus LED or the flash LED blinks during recording. Wait
until recording has finished before turning the mode dial to another
setting or turning the camera off.
Note
• The auto power off function will be triggered if the camera is left
turned on with no buttons operated for the preset time. When you
Recording mode
].
25
N 1600
2001/07/15 11:25
Note
• If the distance to the subject
is less than about 40cm in
Tele mode or 14cm in Wide
mode, use macro mode. See
"Macro Mode" (p.55).
• You can set the image
display time as desired. See
"Changing the LCD
Confirmation Time" (p.97).
• You can record images with
voice memo. See "Images
with Voice Memo" (p.57).
3
43
Advertisement
Table of Contents
