Altronix eFlow104N Series Installation Manual page 16

Models Include:
Model
eFlow104N,
eFlow104N8, eFlow104N8D,
eFlow104N16, eFlow104N16D
eFlow104NX,
eFlow104NX8, Flow104NX8D,
eFlow104NX16, eFlow104NX16D
The eFlow104N series power supply/chargers convert a 120VAC, 60Hz input to a 24VDC output.
Battery
7AH
12AH
40AH
65AH
Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Maximum charge current 1.0A.
• Automatic switch over to stand-by battery when AC fails.
Transfer to stand-by battery power is instantaneous with no interruption.
Red (DC) Green (AC/AC1)
ON ON
ON OFF
OFF ON
OFF OFF
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
Refer to the eFlow Power Supply/Chargers Installation Guide: IIeFlow104N Series, Rev. 104NRP021119 for
complete instructions. This sheet is to be removed, framed and posted next to the unit.
Rev. 104NRP021119
Power Supply/Chargers Operating Guide
Input
120VAC,
60Hz
4.5A
Overview:
Stand-by Specifications:
Burg. Applications
4 hr. Stand-by/
15 min. Alarm
0.4A/10A
1A/10A
6A/10A
6A/10A
LED Diagnostics:
Power Supply Status
Normal operating condition.
Loss of AC. Stand-by battery is supplying power.
No DC output.
Loss of AC. Discharged or no stand-by battery. No DC output.
Output
Auxiliary Power-Limited
12VDC 24VDC
– 10A
Fire Applications
24 hr. Stand-by/
5 min. Alarm
N/A
0.3A/10A
1.2A/10A
1.5A/10A
Output (unswitched)
1A
Access Control
Applications Stand-by
5 Mins./10A
15 Mins./10A
Over 2 Hours/10A
Over 4 Hours/10A
Ripple
Voltage
700mV