3
3.2.2 FWE Pin Select Jumper (JP2)
The JP2 allows the connection for the FWE pin to be selected.
Figure3.2.3 shows FWE pin select jumper (JP2) assignment. Table3.2.2 lists jumper setting for selecting FWE
pin (JP2).
Jumper
Setting
JP2
FDMSEL
: Initial Setting
Note: Do not change jumper settings during the operation of M3A-HS86. Ensure to turn off the power for the
M3A-HS86 before changing jumper settings.
Rev.1.0 Feb 6, 2007
REJ10J0916-0100
Top View of the
Component Side
Board
Edge
Figure3.2.3 FWE Pin Select Jumper (JP2) Assignment
Table3.2.2 Jumper Setting FWE Pin (JP2)
1 - 2
The FWE pin of SH7086 is connected with SW4-1.
2 - 3
The FWE pin of SH7086 is connected with J14 connector.
3.2.2 FWE Pin Select Jumper (JP2)
1
2
3
Board
Edge
Function
Operational Specifications
3-19