Fwe Pin Select Jumper (Jp2) - Renesas M3A-HS25 User Manual

3

3.3.2 FWE Pin Select Jumper (JP2)

The JP2 allows the connection for the FWE/ASEBRK
Figure 3.3.3 shows the FWE pin select jumper (JP2) assignment.
Table 3.3.2 lists the jumper setting for selecting FWE pin (JP2).
Jumper Setting
JP2
FWESEL
: Initial Setting
Note : Do not change jumper settings while the operation of M3A-HS25. Ensure to turn off the power for the
M3A-HS25 before changing jumper settings.
Rev.1.0 July 21, 2006
REJ10J0952-0100
________________
Board
edge
Figure 3.3.3 FWE Pin Select Jumper (JP2) Assignment
Table 3.3.2 Jumper Setting for Selecting FWE pin (JP2)
1 - 2 The FWE pin of SH7125 is connected with H-UDI connector (J1).
2 - 3 The FWE pin of SH7125 is connected with DIP switch (SW4-1).
_____________________
/ASEBRKAK pin to be selected.
Top view of the
component side
Board
edge
Function
Operational Specifications
3.3.2 FWE Pin Select Jumper (JP2)
3-14