Expand Of Flash Memory - Renesas Renasas Single-Chip Microcomputer SH7086 User Manual

2

2.3.3 Expand of Flash Memory

M3A-HS86 has installed the mounting space to which the flash memory can be expanded externally.
The mountable flash memory is 32M bit or 64M bit flash memory with 3.3V power-supply voltage, 16-bit bus width,
and TSOP-48 pin (20 x 12mm).
By a DIP switch (SW4-4), the validity or invalidity of write protect for flash memory can be switched.
Figure2.3.3 shows an example of 32-Mbit Flash Memory connection.
Note: Only the M3A-HS86 (3.3V version) can connect the flash memory to outside.
Rev.1.0 Feb 06. 2007
REJ10J0916-0100
SH7086
A22 - A1
D15 - D0
RD
WRL
CS0
Reset
Vcc
DIP SW
SW4-4
Figure2.3.3 Connection Example with Flash Memory
Flash Memory
32Mbit(2M Word x16bit) or
64Mbit(4M Word x16bit)
22
A21 - A0
16
DQ15 - DQ0
3.3V
BYTE
OE
WE
CE
RP
NC
RY/BY
WP
Functional Overview
2.3.3 Expand of Flash Memory
2-7