Fwe Pin Select Jumper (Jp2) - Renesas M3A-HS49 User Manual

3

3.2.2 FWE Pin Select Jumper (JP2)

The JP2 allows the connection for the FWE pin to be selected.
Figure3.2.2 shows the FWE pin select jumper (JP2) assignment.
Table3.2.1 lists the jumper setting for selecting FWE pin (JP2).
Jumper Setting
JP2
FWESEL
: Initial Setting
Note : Do not change jumper settings while the operation of M3A-HS49. Ensure to turn off the power for the
M3A-HS49 before changing jumper settings.
Rev.1.0 Dec 15, 2006
REJ10J0917-0100
Board
edge
Figure3.2.3 FWE Pin Select Jumper (JP2) Assignment
Table3.2.2 Jumper Setting for Selecting FWE pin (JP2)
1 - 2 The FWE pin of SH7149 is connected with DIP Switch (SW4-1).
2 - 3 The FWE pin of SH7149 is connected with Extension Connector (J14).
Top view of the
component side
3
2
1
Board
edge
Function
Operational Specifications
3.2.2 FWE Pin Select Jumper (JP2)
3-17