Flowchart To Remedy The Troubles - Renesas Emulation Pod for M16C/80 Group MCUs M30803T-RPD-E User Manual

Chapter 6. Troubleshooting

6.1 Flowchart to Remedy the Troubles

Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated
until the emulator debugger starts up. Check this while the target system is disconnected. For the latest
FAQs visit the following URL.
Figure 6.1 Flowchart to remedy the troubles
http://www.renesas.com/en/tools
Turning on the power of PC4701
Front panel LED of PC4701
Normal
Init dialog box of emulator
debugger displayed
Normal
EMEM dialog box of emulator
debugger displayed
Normal
Program window of emulator debugger displayed
Not normal
1. Check emulator system connections.
See, "3.5 Connecting the PC4701 and Emulation Pod"
(page 34).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 48).
3. Restart the PC4701 system.
Not normal/Error displayed
1. Check the operating environment etc. of the emulator
debugger.
See the user's manual of the emulator debugger.
2. Reinstall the emulator debugger.
Not normal/Error displayed
See "6.2 (3) EMEM Dialog is Not Displayed When the Emulator
Debugger Starts Up (When the target system is not connected)"
(page 67).
Error displayed
See "6.2 (4) Errors Occur When the Emulator Debugger Starts
Up (When the target system is connected)" (page 67).
( 64 / 74 )