Renesas Emulation Pod for M16C/80 Group MCUs M30803T-RPD-E User Manual page 28

Table 3.1 Switch settings of the M30803T-RPD-E (1/3)
Signal Switch
SW1
P87/X
CIN
P86/X
COUT
SW2
X SW3
OUT
RDY*/
SW4
HOLD*
Setting
Connects the P87/X
system (uses the P87/X
Connects the P87/X
oscillator circuit (32.768 kHz) on the emulation
pod.
Connects the P86/X
system (uses the P86/X
P86/X
COUT
Connects the P86/X
system (uses the P86/X
X pin of MCU is unconnected.
OUT
Connects the X
Pulls up the RDY* and HOLD* pins of MCU with a
resistance of 33 kΩ.
Be sure to set this when using the emulation pod
while not connecting the target system.
Connects the RDY* and HOLD* pins of MCU to the
target system.
( 26 / 74 )
Description
pin of MCU to the target
CIN
pin as Port P87).
CIN
pin of MCU to the sub-clock
CIN
pin of MCU to the target
COUT
pin as Port P86).
COUT
pin of MCU is unconnected.
pin of MCU to the target
COUT
pin as X
COUT
pin of MCU to the target system.
OUT
).
COUT