Connecting The External Trace/Trigger Cable; Connecting The External Trace/Trigger Cable To The Emulator System; Connecting The External Trace/Trigger Cable To The User System - Renesas Compact Emulator M34571T2-CPE User Manual

M34571T2-CPE User's Manual

2.10 Connecting the External Trace/Trigger Cable

Using the external trace/trigger cable enables record/reference a hardware break by the external trigger, and changes of an
external signal level in the trace window

2.10.1 Connecting the External Trace/Trigger Cable to the Emulator System

Connect the external trace/trigger cable to the connector J4 of the emulator
JP2
EXT
.0V 5 .3V 3
Figure 2.15 Connecting the external trace/trigger cable

2.10.2 Connecting the External Trace/Trigger Cable to the User System

Connect the GND, TRG and EXT0 to EXT3 of the external trace cable to the user system. Figure 2.16 shows the pin
assignment of the external trace cable.
Figure 2.16 Pin assignment of the external trace cable
REJ10J0972-0100 Rev.1.00 February 10, 2006
JP1
T N I
4 L E D 5 L E D
M 34571T2-CPEB REV. A
User system
Connect the external cable
to connector J4
J4
2. Setup
Page 37 of 72