M34571T2-CPE User's Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on emulator
Upper panel LED
Init dialog box of emulator
debugger displayed (first)
Init dialog box of emulator
debugger displayed (second)
Program window of
emulator debugger diplayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
REJ10J0972-0100 Rev.1.00 February 10, 2006
http://www.renesas.com/en/tools
Not normal
of emulator
Normal
Not normal/Error displayed
Normal
Not normal/Error displayed
Normal
See "5.2.(1)When the LEDs of the M34571T2-CPE Do Not
Display Normally" (page 66)
1. Check the operating environment etc. of the emulator
debugger.
'
See the user
s manual of the emulator debugger.
2. Reinstall the emulator debugger.
"
5.2.(2) Init Dialog Box Does Not Appear at Debugger
See
Startup
"
(page 66).
5. Troubleshooting
Page 65 of 72