Power Connectors - XESS XSV Manual

Power Connectors

A standard ATX PC power supply can be connected to the XSV Board through connector
J11. The connector is keyed so power cannot be applied with the wrong polarity.
The XSV Board can also be powered from a 9 VDC power supply through jack J12. The
power supply must have a 2.1mm, center-positive plug. Voltage regulators will generate
the appropriate voltages for the other XSV Board components.
Xchecker Pin Virtex FPGA Pin
16 – CLKI
17 – RST
18 – CLKO
89
144
141
30