Quadratec QuadraTop Adventure Top S Manual page 3

FIG2
Passenger Side
Door Surround
Screw and washer kit
Driver Side Door
Surround
Screw and washer kit
Door Surround Knobs
FIG4
FIG6
FIG7a
Step 2: Rear Door Surround Assembly
Locate the driver's side rear over door assembly
and the driver's side Pillar assembly shown in
FIG 2
In the Driver's side Rear over door assembly,
there is a screw and washer installed for
shipping (Fig 3). Remove this screw and
washer using the included 4mm Allen head tool
and set aside (Do not lose this screw/washer).
FIG5
FIG7
Line up the Driver's side rear over door
assembly and the driver's side Pillar assembly
as shown in Fig 4 making sure the holes line
up. Place the washer over the top of the hole
as shown in Fig 6 and insert the screw (Fig 7).
Tighten this screw securing the two pieces (Fig
7a).
Repeat the above on the passenger side
rear over door and pillar assemblies.
3
FIG3