Quadratec QuadraTop Adventure Top S Manual page 11

When removing the quarter and rear windows from the Top deck be sure to slide
them out completely before pulling down. Disengage the side hook and loop befo-
re sliding the windows out. DO NOT "Peel" the windows out! See Fig 64. Failure to
NOTICE
completely disengage the windows from the "C" Channel will damage the Top and
quarter window!
FIG66
FIG68
FIG70
Step 12: Securing the Side and Rear Windows
to the Vehicle
As shown in FIG's66, 67, & 68, roll the vertical
plastic strip into the door surround slot securing
it to the door surround. Starting at the driver's
side front, attach the side belt rail into the ve-
hicle body by "rolling" the plastic into the slot
(FIG69 & 70). Once secure move to the rear
FIG72
FIG67
FIG69
FIG71
driver's side corner and "roll" the plastic into
the Jeep body corner belt rail while pulling back
towards the rear of the vehicle as shown in
FIG71. Repeat the quarter window install on the
passenger side of the vehicle. You may have to
pull the corners around towards the front or back
of the vehicle to center the top on the vehicle
and to pull the zippers closer.
FIG73
11