Quadratec QuadraTop Adventure Top S Manual page 12

FIG74
FIG76
FIG78
FIG80
Step 13: Securing the tailgate bar & top to the
vehicle
Open the tailgate. Take the factory bar and
orient the "C"-Channel with the round seal fa-
cing down and slide the "C" Channel onto the
rear window retainer as shown in FIGs 72 & 73.
Clip the rear Tail gate retaining brackets to the
body tub just outside the tailgate opening. Roll
the tailgate bar
Step 16: Securing the bow flaps to the bows
With the top installed, go inside the vehicle and
Make sure the hook and loop fastener are tightly secured to the second and rear
bow before the front sun roof is folded back. Both rear corner straps must also
WARNING
be secure when the top is folded back. Make sure these flaps are secure before
driving. These safety measures are designed to secure the top deck to the vehicle
(along with the permanently installed first bow) and if not adhered to can cause
injury, death and a serious accident. Always wear your seat belts when using this
product!
FIG75
FIG77
FIG79
into the mounts with the outside of the fabric
facing towards the rear rear of the Vehicle
(FIGS74 & 75). Once the Tailgate bar in secure,
lower zippers on both sides of the rear curtain
and then secure the rear zipper cover flaps as
shown in FIG76. Work your way around the out-
side of the vehicle and secure all Hook and loop
sealing up the zippers and holes (Figs77, 78, 79
& 80).
secure the hook and loop flap to the second bow
making sure it is secure. See Warning below:
12