Table of Contents
Advertisement
The appliance is supplied without water in the boiler, to avoid damage from exposure to low temperatures; for this very reason, if the
appliance is unused for a long time, water should be removed from the boiler before disconnecting it.
Failure to comply with the above may impair the safety of the appliance and its
service life.
If the appliance remains unused for a long period of time in a place where the temperature is below 0°C, before starting it up, call the
Authorised Help Centre to verify appliance condition.
INSTALLATION
• The appliance is not designed to be built-in.
• After removing the packaging, check the condition of the appliance. If any doubts arise, do not use it and contact the manufacturer directly.
Packaging materials must not be left in the reach of children as they are a potential hazard. Lift the appliance up by its sides and set it down on a
secure support surface.
• The appliance must be installed so that the plug which disconnects the appliance from the electrical mains is still accessible.
• Installation must be carried out in areas where use and maintenance is restricted to trained staff only.
Before plugging the appliance into the mains socket, check that data plate details are the same as those for the installation site.
9
MUM S11MINIBRIO_ENG REV01
Hide quick links:
Advertisement
Table of Contents
