Carton Contents - Bruno ELECTRA-RIDE SRE-1540 Installation Manual

PACKING LIST

CARTON CONTENTS

CHECK CARTON
CONTENTS FOR
SHIPPING DAMAGE
IMMEDIATELY UPON
RECEIPT
*MSDS (Material Safety
Data Sheet) available
from Bruno upon
request. Contact
Service
Department
***NOTE:
Rail sections must have
matching numbers
stamped on the
sections.
© 2004,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
The SRE-1540 is shipped in 5 cartons. Check the contents of the
cartons to be sure you have all of the components before beginning
an installation.
Check the carton contents for shipping damage upon receipt.
Damage claims must be filed by the dealer, not the manufacturer.
Bruno Independent Living Aids cannot be responsible for shipping
damage.
CARTON 1
[ ] 1 COMPLETE CARRIAGE ASSEMBLY
CARTON 2
[ ] 1 Tube WHITE LITHIUM GREASE (16' RAIL)
[ ] 1 FINAL LIMIT SWITCH RAMP ASSEMBLY
[ ] 1 BATTERY CHARGER
[ ] 2 BUMPER ASSEMBLIES
SRE-K-1553 BUMPER ASSEMBLY PARTS KIT
[ ] 4 M8 EXT. TOOTH WASHER
[ ] 4 M8 X 1.25 X 20mm LG. HEX HD. CAP SCREW
[ ] 4 M8 X 1.25 METRIC HEX NUT (PLATED)
[ ] 4 VELCRO STRIPS (2.5" EA.)
[ ] 10 11" LG WIRE TIES
[ ] 32 SHEET METAL SCREWS (M 6.3 X 50 MM)(16' RAIL);
40 FOR (20' RAIL)
[ ] CLAMP SETS:
• 9 (16' RAIL) • 11 (20' RAIL) • 13 (24' RAIL)
• TBD** (CUSTOM RAIL)
**DEPENDS UPON RAIL LENGTH
SRE-K-1501 ELECTRICAL PARTS KIT
[ ] 1 CHARGER HOOKUP WIRE HARNESS
[ ] 1 FUSE (MDL3.5A TIME-DELAY)
CARTON 3
[ ] 1 SEAT ASSEMBLY
[ ] 1 FOOTREST ASSEMBLY
[ ] 1 ANTENNA
[ ] 2 CALL/SEND TRANSMITTERS
[ ] 2 MOUNTING PLATES, CALL/SEND TRANSMITTERS
CALL/SEND HARDWARE KIT
[ ] 1 SRE-K-0055 STANDARD CALL/SEND KIT
---OR---
[ ] 1 SRE-K-0055A COMMERCIAL CALL/SEND KIT
CARTON 4
[ ] 1 EA. RAIL SECTION ***
CARTON 5
[ ] 1 EA. RAIL SECTION ***
[ ] 1 EA. JOINT PLATE
SRE-K-1502 HARDWARE KIT (JOINT PLATE)
[ ] 8 EA. M6 X 16 FLAT HEAD SCREWS
[ ] 8 EA. M6 HEX NUTS
SEPARATE CARTON
[ ] UPON REQUEST CLAMPS, ADJUSTABLE, 9 LBS. EA.
8
SRE-1540 UL 06-18-2004