Kontron SMARC-sAMX8 User Manual page 66

Table of Contents

Advertisement

Kontron SMARC-sAMX8 - Rev. 1.2
Starting wdt_driver (timeout: 5, pre-timeout: 2, sleep: 6, test: ioctl)
Trying to set timeout value = 5 seconds
The actual timeout was set to 5 seconds
Now reading back -- The timeout is 5 seconds
Trying to set pre_timeout value = 2 seconds
[ 262.416085] Kernel panic - not syncing: watchdog pretimeout event
[ 262.416085]
[ 262.423677] CPU: 0 PID: 105 Comm: kworker/0:1 Tainted: G O 4.14.78-imx_4.14.78_1.0.0_ga+g94da7bd #1
[ 262.433856] Hardware name: Kontron SMX8QM i.MX8QM (DT)
[ 262.439018] Workqueue: events scu_mu_work_handler
[ 262.443725] Call trace:
[ 262.446184] [<ffff000008089c48>] dump_backtrace+0x0/0x3c8
[ 262.451593] [<ffff00000808a024>] show_stack+0x14/0x20
[ 262.456649] [<ffff000008d7c240>] dump_stack+0x9c/0xbc
[ 262.461705] [<ffff0000080cecb8>] panic+0x11c/0x28c
[ 262.466502] [<ffff000008a05cf4>] pretimeout_panic+0x14/0x18
[ 262.472076] [<ffff000008a05694>] watchdog_notify_pretimeout+0x3c/0x58
[ 262.478523] [<ffff000008a07044>] imx8_wdt_notify+0x2c/0x38
[ 262.484014] [<ffff0000080ef720>] notifier_call_chain+0x50/0x90
[ 262.489850] [<ffff0000080f0010>] blocking_notifier_call_chain+0x48/0x70
[ 262.496472] [<ffff0000085b5058>] scu_mu_work_handler+0x50/0x78
[ 262.502310] [<ffff0000080e7c94>] process_one_work+0x1d4/0x348
[ 262.508059] [<ffff0000080e7e50>] worker_thread+0x48/0x470
[ 262.513465] [<ffff0000080ee154>] kthread+0x12c/0x130
[ 262.518433] [<ffff000008084ed8>] ret_from_fork+0x10/0x18
[ 262.523753] SMP: stopping secondary CPUs
[ 262.527690] Kernel Offset: disabled
[ 262.531182] CPU features: 0x180200c
[ 262.534674] Memory Limit: none
[ 262.537742] ---[ end Kernel panic - not syncing: watchdog pretimeout event
[ 262.537742]
U-Boot 2018.03-imx_v2018.03_4.14.78_1.0.0_ga+g7ade5b4 (Oct 11 2019 - 13:11:44 +0000)
CPU: Freescale i.MX8QM revB A53 at 1200 MHz at 33C
Model: Freescale i.MX8QM MEK
Board: Kontron sMX8 SMARC 2.0 Module
Boot: SD1
DRAM: 6 GiB
Invalid fsl,pins property in node hoggrp-1
start sata init
SATA link 0 timeout.
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
[pcie_ctrla_init_rc] LNK DOWN 8600000
In: serial
Out: serial
Err: serial
www.kontron.com
// 66

Advertisement

Table of Contents
loading

Table of Contents