Table of Contents
Advertisement
Interfaces via Smarc I/O
I2C
External Fast I2C_GP from Embedded Controller or CPU I2C_PM for Power Management
LAN, USB
2x Gb-Ethernet
1x USB 2.0/3.0 OTG on USB#3 (shared), 1x USB Client/OTG on USB#0, 4x USB 2.0, via
USB Hub
PCIe
3x PCIe Gen3.0 (2 root port)
PCIe B is shared with WIFI/BT module
PCIe C is shared with SATAIII
Display
Dual channel LVDS 1/2x18/24bit (openLDI and VESA) up to 1920x1080
Camera
MIPI CSI camera support default: 2 lane interface and 4 lane interface
SD-Card
1x SDIO
Serial Peripheral
2 x SPI interface on defined pins for general purpose devices
Interface (SPI)
SER
4x serial ports with full function according to SMARC 2.0.
GPIO
12x General Purpose Inputs/Outputs (GPIO)
Other Connectivity
2x CAN
Power
Consumption
Maximum Power consumption of the board is measured to 12 W (Quad Core)
Input Voltage
VCC 3.3V to 5.25V
Power Supply
Voltage Ripple maximum 200mV peak to peak at 0 to 20 MHz. 0.1 to 20ms rise time from
Limits
input voltage ≤10% to nominal VCC inrush current peak limit. G3/S5 to S0 acc. SFX Design
Guide
Power Features
Security
www.kontron.com
Module shall power on automatically in single supply operation when VCC is
connected (Uboot setting)
Module shall be possibly reconfigured to start after PowerButton, when VCC is
connected
HAB, SRTC, SJTAG, TrustZone®
AES256, RSA4096, SHA-256
3DES, ARC4, MD-5
Flashless SHE, ECC
Tamper, Inline Enc Engine
Kontron SMARC-sAMX8 - Rev. 1.2
// 17
Advertisement
Table of Contents
