Intended Purpose; Sensible Fire Safety Precautions - PROBOIL .4E User's Installation Manual

Hide thumbs Also See for PROBOIL.4E:
Table of Contents

Advertisement

WARNING
Do not place any water connections directly near or above electrical appliances or
:
connections.
WARNING
This appliance is not intended to be operated by means of an external timer or
:
separate remote control system.
WARNING
unless attached to a modern consumer unit with RCD protection we recommend
:
installing a local RCD protection device in the socket being used by the appliance.

1.1.3 Intended purpose:

WARNING
This appliance must only be used for heating water.
:
This appliance is intended only for domestic use and should not be used for commercial
purposes.
Do not add to, exchange or modify any component of the boiler, mixer tap, filter or connections
from those supplied and install them only as instructed. The spout exit or any part of the system must
not include any additional third party adaptors or connections that will add resistance to the system.
We only warrant the original filter type supplied with your boiler which is formulated specifically
for the PROBOIL product. If the filter is removed or exchanged for an alternative model it may have a
detrimental effect to your system and accordingly will invalidate your warranty. If you have specific or
unusual incoming water conditions, please contact the service number on the boiler for further
advice.
This appliance is intended to be permanently connected to the water mains.
The boiler and mixer tap are not designed to work with any other combination of appliances
other than as shown within this guide.

1.1.4 Sensible fire safety precautions:

Do not store or use petrol or other flammable rags, paper, aerosols, vapours or liquids in the
vicinity of this or any other appliance.
PROBOIL.4E user & installation guide v1d
5

Advertisement

Table of Contents
loading

Table of Contents