In 1 Tap Installation Only (Taps Excluding Cold Filtered Water Function) - PROBOIL .4E User's Installation Manual

3 in 1 tap installation only (taps excluding cold filtered water function).

3 in 1 tap installation only (taps excluding cold filtered water function).
3 in 1 tap installation 3 in 1 tap installation only (taps excluding cold filtered water function). only (taps excluding cold filtered water function).
10) Write the installation date on the filter label with permanent pen or similar.
11) Remove the dust cap from the filter cartridge (F5), then push the cartridge (F5) firmly into the head (F3) before
twisting it left to right (as shown on diagram) until fully secured.

The filter cartridge (F5) and head (F3) both have alignment marks to indicate when the filter is correctly and
securely inserted.
⚠
The water hoses supplied are manufactured from WRAS approved materials. Please do not substitute or extend
the hoses supplied with unknown hoses, as you risk tainting the taste of your water.
PROBOIL.4E user & installation guide v1d
a) Cut a length of ¼" blue pipe (E1) and
firmly push this into the push fit
adaptor (F7).
b) Connect pipe (E1) to the boiler (see
boiler instructions).
38