Replacing Your Proboil Filter - PROBOIL .4E User's Installation Manual

Replacing your Replacing your PROBOIL filter: PROBOIL filter:
Replacing Replacing your your PROBOIL filter: PROBOIL filter:
Before beginning you should have ready to hand:
Your replacement filter

A large bowl or pan or jug or small bucket

Valve Open
1) Turn on the 98°C water by holding the Hotkey close to the 'cup' symbol.
2) Turn the blue lever found on the three way tee (E4) to the closed position as shown.
3) The flow rate of the 98°C water coming from the tap should gradually decrease, before stopping completely. Now
remove the Hotkey from the tap.
4) Turn the filter (C5) anticlockwise (from right to left) then pull the filter (C5) downwards away from the filter head
(C3), have your cloth to hand in case a small amount of water remains in the pipework.
Note: Please dispose of the old filter in an appropriate manner, your PROBOIL filter is part our filter recycle scheme and
can be returned to us following the instructions in the leaflet that will come with your new replacement filter.
5) Unpack the new filter and check for any transport damage, write the replacement date on the filter label in
permanent pen and remove the blue plastic dust cap from the top of the filter.
6) Insert the filter cartridge (C5) upwards into the filter head (C3). Note the filter label should be facing you when
fitted.
7) Turn the filter cartridge (C5) fully clockwise (left to right) to secure the filter cartridge (C5) to the filter head (C3).
PROBOIL.4E user & installation guide v1d
A cloth

A permanent pen

Valve Closed
14