PROBOIL .4E User's Installation Manual page 18

3) Pull the mains power plug (D) out
from the socket on the left-hand face
of the boiler.
4) Unscrew and detach the blue inlet
wing nut connector (G) from the top
of the boiler (B).
5) Firmly pull/peel the silicone rubber
high temperature output hose (K) off
from the red outlet wing nut (J)
connector.
6) Lift up then pull the boiler forwards to
unhook the boiler from its keyhole slot
fixings away from the wall it is
mounted on and place it on the
cabinet floor.
7) Unscrew and detach the red outlet
wing nut (J) connector from the top of
the boiler (C).
8) If the 3/8" rubber seal (I) becomes
detached from the red outlet wing nut
(J) connector then reinsert it the seal
inside connector (J).
PROBOIL.4E user & installation guide v1d 18