Table of Contents
Advertisement
MOUNTING OF WALL-HUNG MODEL
Installation must be planned and executed in accordance with
national and local building regulations.
The stove must only be fitted to a non-flammable wall. There
must be no form of flammable component in the wall.
To ensure correct installation we recommend that a building
expert and a local chimney sweep be commissioned to plan
and outline the installation with a view to subsequent
approval.
For wall installation we recommend using the wall brackets
supplied.
If a chimney is installed on top of a wall-hung model, the
chimney must be fully self-supporting. It must not rest on
the wood-burning stove. There must be a distance of at least 6
mm between the first section and the flange on the flue collar.
Please consult a specialist.
Scan A/S disclaims all liability for the installation of
wall-hung wood-burning stoves.
16
Lift the wall bracket off the stove.
Draw a vertical line on the wall (you can use a spirit level).
Use this line for the mounting of the wall fitting
40 mm
1
Advertisement
Table of Contents
