Related Manuals for SCAN ANDERSEN 8
Summary of Contents for SCAN ANDERSEN 8
- Page 1 Instructions for Installation and Use SCAN ANDERSEN Stoves ENGLISH April 2003 Krog Iversen & Co. A/S, Glasvænget 3-9, DK-5492 Vissenbjerg...
-
Page 2: Instructions For Installation
INSTRUCTIONS FOR INSTALLATION Congratulations on your new ANDERSEN wood burning stove. We are confident that you will enjoy your new stove, especially if you follow the instructions and advice given below. An original ANDERSEN stove possesses a number plate. The registration number can be attached to the invoice that is to submit to the dealer in case of later complaints covered by the guarantee. -
Page 3: Mounting Possibilities
Birchwood with max. 20% humidity TYPE Nominal output Amount of fuel kg/h Andersen 1 Andersen 4 Andersen 8 COMBUSTION CHARACTERISTICS OF DIFFERENT WOOD TYPES: Type of Tree Combustion value per m3 Combustion value per kg Notes (in kWh) (in kWh) Beech 2.100... -
Page 4: Lighting And Stoking
It is also possible to use lignite briquettes in the model ANDERSEN 4 (1.4 kg/h) or small "energy" briquettes. In this case you must use a cast iron coal grate (accessory). In ANDERSEN 4 and ANDERSEN 8 it is recommended to stoke max. 2 logs or 4 lignite briquettes (only ANDERSEN 4) or two shovelfuls of "energy"... - Page 5 Ash Grate: In general, the ash grate of ANDERSEN 4 should be closed when firing with wood and open when firing with lignite briquettes. ANDERSEN 1 and ANDERSEN 8 are exclusively for wood burning.
-
Page 6: Maintenance Instructions
Stoking During Spring Time and Autumn: At outdoor temperatures of more than 15°C, the stove may be under fired, and a so-called "cold" combustion will take place. The result will be an increasing formation of soot in the smoke ducts of the stove, the chimney connector, and in the chimney. - Page 7 Fouled glass: • Is the combustion air valve adjusted according to the instructions? • Is the wood dry? Fouled chimney: • Incorrect combustion? • Is the wood dry? The shaking grate is stuck: • Check if a piece of wood, a pin or the like is stuck •...
- Page 8 Warranty conditions for SCAN wood-burning products All SCAN wood-burning stoves and inserts are made of first-class material and are subject to a strict quality control, before they leave the factory. However, an error may occur, wherefore we back all SCAN wood-burning stoves and inserts with an extensive five years limited warranty.