Mounting Of Wall-Hung Model - SCAN 68-1 Assembly And Instruction Manual

MOUNTING OF WALL-HUNG MODEL

Installation must be planned and executed in accordance with national and local building regulations.
The stove must only be fitted to a non-flammable wall. There must be no form of flammable component in the wall. In the
case of thin walls, nor must there be any behind the wall. The load-bearing capacity of the wall must be checked under all
circumstances.
To ensure correct installation we recommend that a building expert be commissioned to plan and outline the installation
with a view to subsequent approval.
For wall installation we recommend using the wall brackets supplied.
If a chimney is installed on top of a wall-hung model, the chimney must be fully self-supporting. It must not rest on the
wood-burning stove. There must be a distance of at least 6 mm between the first section and the flange on the flue collar.
Please consult a specialist.
Scan A/S disclaims all liability for the installation of wall-hung wood-burning stoves.
Is only to be removed for external air supply
klargøring til vægbeslag
EMNE:
AREAL:
Scan 68
NAVN:
N/A 12-05-2015
DATO:
VÆGT:
MATERIALE:
N/A
Krog Iversen & Co A/S
DIMENSION:
DK-5492 Vissenbjerg©
C:\Working Folder\Designs\Scan 68\90068036.idw
STI:
Must be removed for wall fitting
Use either a drilling machine with Ø 6 mm drill or
cutting nippers to remove the illustrated plates
90068058
TG.NR:
topafgang
EMNE:
hms
SIGN:
Must be removed, also in the
heat shield, for wall fitting
Replace with the inclosed
Type plate
Scan 68-7 and 68-8
Wall mounted room heater fired by solid fuel
Standard: EN 13240 DoP 90068601
Minimum distance to combustible materials
Do not install on combustible materials
Side: 500 mm - Front: 950 mm
CO emission at 13% O2: 0,04% 556 mg/Nm³
Dust at 13% O2: 14 mg/Nm³
Flue gas temperature: 265°C
Nominal heat output: 5,5 kW
Efficiency: 80%
Fuel type: Wood
Operation type: Intermittent
The appliance can be operated in a shared flue.
Country Classification Certificate/Standard Approved by
EUR Intermittent EN 13240 Teknologisk Institut
Norway NS 3058 Teknologisk Institut
15a B-VG ELAB-2100-AUS Teknologisk Institut
Austria
Schweiz LRV 11 VKF
Germany Stufe 2 1. BlmSchV
Follow assembly- and instructions manual.
Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
1000 Scan A/S DK 5492 Vissenbjerg 04-2015
N/A
VÆGT:
N/A
AREAL:
17
23-
DATO:
Krog Iv
DK-549