Installing The Wireless Siren On A Wall - Thermo Scientific Smart-Vue Administrator's Manual

Wireless Siren
16.3.2 Typical Installation
16.4 Installing the
Wireless Siren on a Wall
82 Administrator Guide v 2.2
Smart-Vue sirens connect wirelessly to one or more wireless receivers, just as
the other wireless modules in your network:
Figure 45. Typical wireless siren installation
The computer running the monitoring system software triggers the siren
wirelessly via the receiver when it detects an alarm condition in a wireless
module or repeater.
CAUTION: A given receiver can trigger several different sirens, and several
receivers can trigger a given siren. However, there is a limit of one siren per
logical group configured in your system.
1. For strong adhesion, wipe and dry the back of the siren and the wall
where you intend to place the unit.
2. Attach one side of the Velcro tape to the back of the siren and the other
on the wall where you intend to place the unit.
3. Place the siren on the wall using the Velcro.
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution