Thermo Scientific Smart-Vue Administrator's Manual page 128

Preventive Maintenance Guidelines
22.1.2.2 Interference with
other electronic devices
122 Administrator Guide v 2.2
Receiver placement
Receivers should not be installed on the same side of the wall as the module.
Near a wall, the radio waves are likely to be subject to interfering dispersions
or reflections. Consequently, position the receiver on the opposite or
connecting wall.
Figure 68. Placing the receiver to achieve clearest signal
Distance between receiver and sources of interference
The distance between
GSM/DECT/wireless LAN) or high-frequency sources of interference
(computers, audio and video equipment) should be at least 40 centimeters.
Figure 69. Respect minimum distance between devices
Smart-Vue products use the license-free ISM band (Industrial Scientific
Medical). This frequency is reserved for remote monitoring-type
applications, and is different from those used for cellular telephones and
wireless land-line phones (DECT), and those used for Wi-Fi and Bluetooth
wireless protocols. There is therefore no risk of frequency interference or
disturbance with these types of devices. The wireless system used in
Smart-Vue products complies with current international standards and
regulations for each country in which they are sold.
receivers and other
Thermo Scientific Smart-Vue
transmitters (e.g.
®
Wireless Monitoring Solution