TCP/IP Receiver
12.3.1 General Requirements
and Recommendations
12.3.2 System Requirements
48
Administrator Guide v 2.2
•
The machine running Smart-Vue Server software runs continuously,
24/7/365, and should be connected to an Uninterruptible Power Supply
(UPS) that protects against power surges and provides power to back up
the machine and components.
•
The AC adapter used for your network receiver should also be plugged
into the UPS.
•
The UPS is also recommended as a power backup for your
communication/network systems
•
Weekly manual system testing (e.g., pull a sensor, verify that the
communication system is working) should be performed as defined in
the Standard Operating Procedure (SOP).
•
Recommended maintenance and calibration procedures should be
followed.
•
If you are storing cold products, Thermo Scientific recommends use of a
back-up cooling system (e.g., CO
temperature below the critical level should a power failure occur.
Contact your local sales representative for more information.
•
Thermo
Scientific
Qualifications (IQ/OQ) be performed before initial use.
•
For timely notification of an emergency/alarm, it is critical to establish
primary, secondary and tertiary call-out procedures with escalation so
contact is not dependent on reaching just one individual. Ideally,
ultimate contact is with a security department or company with 24/7
monitoring.
Please see the Smart-Vue Client 2.2 Software User Manual for an in-depth
description of Smart-Vue end-point module configuration, alerts,
notification, data management and general system features.
CAUTION: Do not install Smart-Vue Server on a laptop computer.
For Windows system compatibility, refer to Section 21.2 "Software
compatibility".
•
Machine running the following Microsoft Windows 32- or 64-bit
systems:
Windows 7, Windows 8, Windows 10, Windows Server 2008,
Windows Server 2012, and Windows Server 2016
•
10/100/1000 Mbit Ethernet network (TCP/IP)
or LN
) to maintain freezer chamber
2
2
recommends
Installation
Thermo Scientific Smart-Vue
and
Operational
®
Wireless Monitoring Solution