Table of Contents
Advertisement
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly
inspect the shipment before you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in
good condition. Do not sign the bill of lading until after you have inspected the shipment. If any of
the items listed on the bill of lading are missing or damaged, do not accept the shipment until the
carrier makes a notation on the bill of lading that lists the missing or damaged goods.
If you discover missing or damaged goods after you receive the shipment and have signed the bill
of lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will
not make an inspection, prepare a signed statement to the effect that you have notified the carrier
(on a specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If
this happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill
of lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this entire manual carefully before using your new product.
install or operate the product until you are familiar with all operating instructions and warnings.
Refer to ANSI/ALI ALIS Standard Safety Requirements for Installation and Service of Automotive Lifts
for more information about safely installing your Lift.
⚠
WARNING
IMPORTANT SAFETY INSTRUCTIONS! SAVE THESE INSTRUCTIONS!
Read all instructions.
Care must be taken as burns can occur from touching hot parts.
Do not operate equipment with damaged pneumatic or hydraulic hoses and fittings or if the
equipment has been dropped or damaged – until it has been examined by a qualified service
person.
Do not let pneumatic or hydraulic hoses hang over the edge of a table, bench, or counter or
come in contact with hot manifolds or moving fan blades.
RML-1500XL ATV / Motorcycle Lift
California Proposition 65. This product can expose you to chemicals including
styrene and vinyl chloride which are on the list of over 900 chemicals identified
by the State of California to cause cancer, birth defects or reproductive harm.
ALWAYS use this product in accordance with BendPak's instructions. For more
information go to www.P65Warnings.ca.gov.
4
Do not
P/N 5900183 — Rev. E2 — May 2022
Advertisement
Table of Contents
