Table of Contents
Advertisement
Locate the two Drive-Up Ramps (5601334) and two Drive-Up Ramp Tubes (5746484).
Thread one Drive-Up Ramp Tube into the bottom of each Drive-Up Ramp hand-tight in the
outside position on each Ramp.
Place the Drive-Up Ramps on the Ramp end of the Lift. Orient and verify the Drive-Up Ramps
are securely engaged in the guide holes in the Lift's Base. Refer to the figure below.
Test each Drive-Up Ramp to verify is stable.
21
RML-1500XL ATV / Motorcycle Lift
P/N 5900183 — Rev. E2 — May 2022
Advertisement
Table of Contents
