Ranger RML-600XL Installation And Operation Manual

Atv / motorcycle lift

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Installation and Operation Manual

Manual P/N 5900381 — Manual Revision D — June 2019

Model:

• RML-600XL

Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.

⚠

DANGER

ATV / Motorcycle Lift

Read the entire contents of this manual before using this product.

Failure to follow the instructions and safety precautions in this manual

can result in serious injury or death. Make sure all other operators also

read this manual. Keep the manual near the product for future

reference. By proceeding with installation and operation, you agree

that you fully understand the contents of this manual.

1645 Lemonwood Dr.

Santa Paula, CA 93060 USA

Toll Free: 1 (800) 253-2363

Telephone: 1 (805) 933-9970

rangerproducts.com

Table of Contents

Need help?

Do you have a question about the RML-600XL and is the answer not in the manual?

Questions and answers

Summary of Contents for Ranger RML-600XL

Page 1 Installation and Operation Manual Manual P/N 5900381 — Manual Revision D — June 2019 Model: • RML-600XL Designed and engineered by BendPak Inc. in Southern California, USA. Made in China. ⚠ Read the entire contents of this manual before using this product.
Page 2 You can always find the latest version of the Warranty. The BendPak Ranger warranty is more than a commitment to you: it is also a commitment to the value of your new product. For full warranty details, contact your nearest BendPak Ranger dealer or visit bendpak.com/support/warranty.
Page 3: Table Of Contents
More information about the full line of BendPak Ranger products is available at rangerproducts.com. This manual is mandatory reading for all users of the RML-600XL, including anyone who sets up, operates, maintains, or repairs it. ⚠ DANGER Be very careful when setting up, operating, maintaining, or repairing this equipment;...
Page 4: Shipping Information
• Do not leave the Lift when raising or lowering it until engaged on Safety Locks or fully lowered. • Do not use the product while tired or under the influence of drugs, alcohol, or medication. • Do not make any modifications to the product. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 5 Instead, take the unit out of service, then contact an authorized repair facility, your distributor, or BendPak Ranger at (805) 933-9970. • BendPak Ranger recommends making a thorough inspection of the product at least once a year. Replace any damaged or severely worn parts, decals, or warning labels.
Page 6: Specifications
100 psi. Additionally, a water separator must be installed on the Air Supply. Failure to use a pressure regulator and/or a water separator could lead to damage to the Lift and voids the warranty. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 7: Components
Components The main components of the RML-600XL ATV/Motorcycle Lift include: • Platform. The flat section on which you put the ATV or Motorcycle. Includes the Clamp (for clamping the front tire). • Scissor Arms. Under the Platform, they move up as the Platform is raised and move down as the Platform is lowered.
Page 8 • Side Extensions. Installed on each side of the Platform, they let you increase the width of the Platform. Install them if you are going to be raising ATVs. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 9: Installation
Only experienced, trained technicians are allowed to install the Lift. ⚠ CAUTION Certain parts of installing the Lift are difficult. BendPak Ranger strongly recommends having at least three people work together to install the Lift. Get the Right Tools You may need some or all of the following: •...
Page 10 You need a certain amount of space around the Lift to use it effectively. ⚠ WARNING For safety, only the Technician should be within 30 feet of the Lift during use. Not necessarily to scale. Not all components shown. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 11 Many of the Lift components come bubble wrapped; remove the bubble wrap. Each container includes a bag with the necessary Nuts, Washers, Bolts, and other pieces. BendPak Ranger recommends carefully laying them out near where you are going to set up the Lift so that they are easily accessible when needed.
Page 12 9. Use the Lower End of the Air Pump to lower the Platform and engage it on the top Safety Lock. 10. Make sure the Platform is engaged on the top Safety Lock. The Platform is now ready for the rest of the installation. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 13 The Side Extensions are held in place by two Connecting Poles and their Lock Bolts and Cotter Pins. You can install/use the Platform Extension and the Side Extensions separately or together. Top view. Not necessarily to scale. Not all components shown. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 14 The following procedure describes installing both the Platform Extension and the Side Extensions. BendPak Ranger recommends a minimum of two people to install the Platform Extension, Side Extensions, and the Ramps. Use the drawing on the previous page in conjunction with the following procedure.
Page 15 3. Use four of the Bolt, Washer, and Nut sets to secure the Handle Assembly to the Platform. BendPak Ranger recommends orienting your Bolts, Washers, and Nuts as shown here. 4. Use four more Bolt, Washers, and Nut sets to secure the Handle Assembly to the Moveable Clamp Arm.
Page 16: Operation
If you see anything wrong, take the Lift out of service, disconnect it from its Air Supply (if connected), and then contact an authorized repair facility, your distributor, or BendPak Ranger at (805) 933-9970. • Only allow trained, supervised personnel to operate the Lift.
Page 17 13. When the Platform stops moving, hold the Lower End of the Air Pump down for a couple more seconds, then make sure the Safety Lock Release Handle is engaged on the same Safety Locks on both sides. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 18 6. Walk the Vehicle off the Platform. Do not ride the Vehicle off. Do not stand on the Platform with the Vehicle. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 19 Finding a Location Clearances. 7. Take the Dolly off the Dolly Hook. 8. Make sure the Lift is stable. 9. Begin using the Lift at the new location. RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 20: Maintenance
Vehicle is safely off the Platform, take the Lift out of service, determine the source of the problem, resolve the problem yourself, visit www.bendpak.com/support/, or call BendPak Ranger at (805) 933-9970. Do not put the Lift back into service until the issue has been resolved. RML-600XL ATV / Motorcycle Lift...
Page 21: Labels
Labels RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 22: Parts Diagrams
Parts Diagrams RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...
Page 23 Retaining ring Bolt M8×25 Piston Lock washer Ø8 O-Ring Washer Ø8 O-Ring Nut M8 Seal ring Pipe Retaining ring Pipe sleeve Retaining ring Piston rod Bolt M10×16 O-Ring RML-600XL ATV / Motorcycle Lift P/N 5900381 — Rev. D — June 2019...

Ranger RML-600XL Installation And Operation Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ranger RML-600XL

Summary of Contents for Ranger RML-600XL

Table of Contents