Table of Contents
Advertisement
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly
inspect the shipment before you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in
good condition. Do not sign the bill of lading until after you have inspected the shipment. If any of
the items listed on the bill of lading are missing or damaged, do not accept the shipment until the
carrier makes a notation on the bill of lading that lists the missing or damaged goods.
If you discover missing or damaged goods after you receive the shipment and have signed the bill
of lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will
not make an inspection, prepare a signed statement to the effect that you have notified the carrier
(on a specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If
this happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill
of lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this manual carefully before using your product. Do not install or operate the product until
you are familiar with all operating instructions and warnings. Do not allow anyone else to operate
the product until they are also familiar with all operating instructions and warnings.
Safety Information
Please note the following:
• The product is an ATV/Motorcycle Lift. Use it only for its intended purpose.
• The product should only be operated by trained, authorized, and supervised personnel. Keep
children and untrained personnel at least 30 feet away from the unit while it is in use.
• You must wear OSHA-approved (publication 3151) Personal Protective Equipment at all times
when installing, using, maintaining, or repairing the Lift. Leather gloves, steel-toed work boots,
ANSI-approved eye protection, back belts, and hearing protection are mandatory.
• When the product is in use, keep all body parts away from it.
• Make sure loads are always centered, balanced, and secured on the Platform before working on
the load or raising or lowering the Lift.
• Do not put more than 1,500 pounds / 680 kg on the Lift.
• Do not step on the Lift when it is on the ground or climb onto it when it is raised. Only put a
Motorcycle or an ATV onto the Platform.
• Do not leave the Lift until it is either engaged on a Safety Lock or fully lowered to the ground.
• Do not use the product while tired or under the influence of drugs, alcohol, or medication.
RML-1500XL ATV / Motorcycle Lift
4
P/N 5900183 — Rev. E — Feb. 2020
Advertisement
Table of Contents
